The fastest high Performance Commercial Gate Operator

Max Phantom F6 | The Fastest High Performance Commercial Gate Operator

Dual Gate, Low Profile High Yield (2,000 lbs at 15ft)

Boasting direct drive speeds of 6 – 10 seconds to 90 degrees, the Max Phantom F6 is among the fastest commercial swing gate operators available today. Best of all, the direct drive design means there’s no risk of gate jams brought on by faulty chains, belts, or pulleys. Matching the low profile design of the Max Phantom 2000, this Phantom F6 is the perfect solution for when you need a fast, discreet, high performance gate operator.

Phantom F6 Mechanical Specifications

  • Lowest profile design in the industry, ONLY 15.5” tall
  • Max Phantom F6 dimensions (22”W x 18.75”D x 15.5”H)
  • Heavy duty gear box 500:1 Size 80 constant lubrication using special gear oil
  • Opens gates up to 1600lb/15 ft
  • Large output shaft 3.25” solid steel with cast iron clamping system
  • Fast speed direct drive (no chains, belts, or pulleys) opens gate
  • in 6 – 10 seconds to 90 degrees with selectable speed control
  • Mechanical and electrical manual gate release functions
  • Dual layer corrosion protection gold zinc and powder coating
  • Built-in loop rack
  • Gate operator shipping weight 216.5 lbs including operator, 1 control box, 1 swing arm and battery module
  • Continuous cycle at extreme temperature range. No overheating possibility
  • Intelligent ramp-up and ramp-down gate speed control for smooth operation

Phantom F6 Security Specifications

  • High traffic intuitive loop management system for better security
  • Advanced security features with built-in audible and remote alarms
  • Magnetic lock control relay outputs with selectable delay times
  • Tamper alert relay outputs triggered “on” if gate is forced open
  • Audible alarm if gate is tampered with or ERD is triggered for higher security
  • Gate partial open recorder
  • Lockable cover with key lock release to prevent intruders and vandals
  • Gate disable feature, disables all inputs with exception of the firedepartment input
  • Built–in transaction buffer for high security
  • Gate status outputs for gate monitoring
  • Direct motor control of jog OPEN/CLOSE for manually moving a gate in case of emergency
  • Advanced anti-tailgate features to provide higher security
  • No need for magnetic lock with the robust output shaft and clamp design of the Max Phantom F6

Phantom F6 Safety Specifications

  • Adaptive obstruction sensor for much better gate safety system. 16 selectable sensitivity settings
  • Built-in UL buzzer reset
  • UL 325 Class of operation I, II, III, and IV. CSA approved
  • Pinch arm protection design
  • Magnetic dynamic brake system stops the gate immediately to prevent damage to obstructions
  • Vehicle hit protection technology protects the gate operator from collision damage caused by automobile impact
  • Built-in advanced entrapment protection and alarm output
  • Built-in gate in motion alarm for industrial applications

How does the form factor of a Max Phantom F6 lend itself to power and speed?

The Phantom F6 chassis houses a size 80, 500:1 high efficiency gearbox in order to produce maximum torque while utilizing low amperage and remaining silent during use. In addition, the Phantom F6 implements a unique modular design, allowing for customization in both installation and layout. Other mechanical specifications include:

  • Low-profile dimensions (22”W x 18.75”D x 15.5”H)
  • Gate opening capacity of up to 16000lb/15ft
  • 6 – 10 seconds to 90 degrees with selectable speed control
  • Ramp-up and ramp-down gate speed control for smooth operation

 

Is the Max Phantom F6 susceptible to overheating or other negative effects brought on by weather?

High-speed ball bearings and a synthetic oil bath are used to keep the Phantom F6’s dual gear reduction operating through extreme temperatures. This continuous cycle design means there is no overheating possibility. Here are some of the other included weatherproofing measures:

  • Gold zinc-coated steel, applied before an electrostatic powder coating
  • Solar-ready battery module with built-in solar regulator
  • Lightning protection up to 20KVolts and 10KAmps on all inputs and outputs (44) channels
  • Three modes of selectable battery backup functions, in case of power outage

 

What kinds of safety features are included in the Max Phantom F6?

In addition to a wide variety of security options, the Phantom F6 is designed to help ensure safe operation for both people and property. Several features, like the gate-in-motion alarm, advanced entrapment protection, and UL buzzer reset, are built in to the operator. Other features include:

  • Adaptive obstruction sensor with 16 selectable sensitivity settings
  • Magnetic dynamic brake system capable of immediately stopping the gate in case of obstructions
  • Vehicle hit protection technology helps protect the gate operator from collision damage brought on by automobile impact

Are You Ready to Get Started on Your Dallas Fence Project?

Call Viking Fence Today and Get Your FREE No Hassle Estimate from Your Dallas Fence Company.